CB63
Standard: CC333G
International Standards: more info
Composition in % (Mass fraction)
| % min. | % máx | |
|---|---|---|
| Al | 8,5 | 10,5 |
| Cu | 76 | 83 |
| Fe | 4 | 5,5 |
| Mn | 3 | |
| Nia | 4 | 6 |
| Bi | 0,01 | |
| Cr | 0,05 | |
| Mg | 0,05 | |
| Pb | 0,03 | |
| Si | 0,1 | |
| Sn | 0,1 | |
| Zn | 0,5 |
a For gravity die cast pieces, the minimum content in iron for ingots and cast pieces must be 3.0% and the minimum content of nickel must be 3.7%
CB63
Standard: CC333G
| Casting process and designation | GC | GZ |
|---|---|---|
| Tensile Strength Rm N/mm2 min. |
650 | 650 |
| Yield point 0,2% Rp0,2 N/mm2 min. | 280 | 280 |
| Elongation A % min. | 13 | 13 |
| Brinell hardness HBW min. | 150 | 150 |
CB63
Standard: CC333G
| Density kg/dm3 | 7,6 |
|---|---|
| Specific heat j/g. k | 0,418 |
| Terminal expansion 10-6 k | 17 a 19 |
| Thermal conductivity W/m. ºk | 60 |
| Electrical conductivity m / (Ohm.mm2) | 4 a 6 |